30W Gigabit PoE+ Injector

A PoE adapter adding power injecting up to 30W power the Ethernet cable to power up the PoE device.

Model Version	POE200 1.0
Protocols	802.3 Protocols	802.3i 10 Mbps over Twisted Pair 802.3u 100 Mbps over Twisted Pair 802.3ab 1 Gbps over Twisted Pair 802.3af PoE 802.3at PoE
PoE	Uplink Stream	1× GbE
	Downlink Stream	1× GbE, 802.3at/af
	Downlink Pin Assignment	Mode A
	Transimission Distance	Cat. 5e or higher cable: 100 meters at Gigabit Note: Total cable length from the uplink switch through the PoE adapter to the downlink device is measured as one segment
Interfaces	LED	Power
	Power Input	AC Inlet
Power	AC	100-240V, 50/60Hz
	Max Power Output	30W
Reliability	Power Protection	Surge Protection ESD Protection Overvoltage Protection Short-Circuit Protection
	EMC	IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV
	Grounding Methods	Three-Prong Plug
	Environment	Ambient Operating Temperature: -10~45 ℃ (14~113 ℉) Storage Temperature: -40~70 ℃ (-40~158 ℉) Operating Humidity: 10%~95% non-condensing Storage Humidity: 5%~95% non-condensing
Certifications	FCC, CE
Mechanical	Installation	Desktop Wall-mount
	Dimension	121×50×36 mm 4.76×1.97×1.42 inches
	Casing Material	Plastic
Package Content	POE200 Power Cord Mounting Kit Installation Guide
Ordering Information	Retail Package Dimension	171×72×72 mm 6.73×2.83×2.83 inches
	Carton Net Weight	13.85 kg (30.53 lbs)
	Carton Gross Weight	14.85 kg (32.74 lbs)

Transmission distance is the cable length measured from the uplink switch through the PoE adapter to the downlink device.

POE200