4-FE PoE Switch with 2 Uplink FE

A wall-mounted 6-FE PoE switch with a 65W power supply and a silent cooling system.

odel Version	FS1006P 2.0
Interfaces	10/100 Mbps RJ45 Ports	6
	10/100 Mbps RJ45 PoE Ports	#1~#4
	Max Power on a Single PoE Port	30W
	PoE Port Notes	The PoE ports comply with IEEE 802.3at/af standards.
	Extend Mode Ports	#1~#4
	VLAN Mode Ports	#1~#4
	LED	Power Link/ACT of Each Ethernet Port DIP Mode (SW)
	Power Input	AC Inlet
	Physical Buttons	VLAN/Default/Extend DIP Switch
Performance	Copper Speed and Distance	Cat. 3 or higher cable: 100 meters at 10 Mbps Cat. 5 or higher cable: 100 meters at 100 Mbps Cat. 5e or higher cable: 250 meters at 10 Mbps
	Copper Speed and Distance Note	250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
	MAC Address Table	1024
	Max Switching Capacity	1.2 Gbps
	Max Forwarding Rate	0.8928 Mpps
	Packet Buffer	448 Kbit
Power	Power Methods	AC
	AC	100-240V~, 50/60Hz
	Power Supply	65W
	Max Power Excluding PoE	1W
Switching	802.3 Protocols	802.3i 10BASE-T 802.3u 100BASE-TX 802.3x Flow Control 802.3af PoE 802.3at PoE
Reliability	Grounding Methods	Three-Prong Plug Grounding Point
	Environment	Operating Temperature: 0~40 ℃ (32~104 ℉) Storage Temperature: -40~70℃ (-40~158 ℉) Operating Humidity: 10~90% non-condensing Storage Humidity: 10~95% non-condensing
Mechanical	Dimension	200×118×44 mm 7.87×4.65×1.73 inches
	Casing Material	Metal
	Installation	Desktop Wall-mount
Package Content	FS1006P Power Cord Installation Guide
Ordering Information	Retail Package Dimension	245×190×60 mm 9.65×7.48×2.36 inches